Corporate   |   SolidFIT   |   Partner Login   |   Menu
Close Menu

Connect With Us

Phone (847) 918-0111
Toll-Free (800) 963-4458 Fax (847) 918-8183

Facility

Wm. W. Meyer & Sons, Inc. 1700 Franklin Boulevard
Libertyville, IL 60048 U.S.A.
Hours Monday - Friday
8 am - 4:30 pm CDT

Website Info

©Wm. W. Meyer & Sons, Inc.

Terms of Use & Privacy Policy

Designed and built by
Launch Digital Marketing

PNEUMATIC SCREW PUMP

 

The Meyer Pneumatic Screw Pump is a heavy-duty dry material injection pump. It is designed to feed dry pulverized material into a pneumatic conveying line. The Screw Pump works where other dilute phase feeders have failed due to problems like abrasive wear, friable materials or fine material dust. Unlike rotary airlocks, which require tight clearances to seal against the conveying air, the Screw Pump utilizes conveyed material to form a seal. An integral gate prevents blow-back when priming or running empty.

The Screw Pump eliminates blow-back and early failure from abrasive wear; it reduces excessive maintenance and unplanned, costly downtime. There are five standard models available. During fabrication and assembly, the Screw Pump is optimized for your specific feeder needs.

Increased conveying rates with less air
No blowback, even when running empty
Increased resistance to abrasive materials
Low Profile
Fully warranted and guaranteed
Longer bearing life/fewer system shutdowns
Reduced operating and maintenance costs
Plastics, Chemical, Cement, Mining, Food, Asphalt

  • Heavy Steel Channel Frame
  • Quad Seal
  • Integral check valve
  • Hard coated shaft assembly
  • Low inlet hopper height
  • Three conveying air inlet points
  • No product contact with bearings
  • Temperatures up to 450°F
  • Low conveying pressure -4 to 12 PSI
  • Oversize Bearings


Request a Free Consultation

Product Chart

MODEL 4445666768
CFM611223445
LINE SIZE456810
Have questions? We are here to help Customize this Product

Featured Video

Meyer Screw Pump is a heavy-duty dry material injection pump, designed to feed dry pulverized material into a pneumatic conveying line. The Screw Pump works where other dilute phase feeders have failed due to problems like abrasive wear, friable materials or fine material dust. Unlike rotary airlocks, which require tight clearances to seal against the conveying air the Screw Pump utilizes conveyed material to form a seal. An integral gate prevents blowback when priming or running empty.
The Screw Pump eliminates blowback and early failure from abrasive wear; it reduces excessive maintenance and unplanned, costly downtime. There are five standard models available. During fabrication and assembly, the Screw Pump is optimized for your specific feeder needs.




Meyer-Made™

DURABILITY, THAT’S A GIVEN. VALUE, THAT’S MEYER-MADE™